Screw cap Ø 13 mm Bing 50-200, +3 mm extra screw thread
This 13 mm screw cap, located on the bottom of older models of BING carburetors, is available with 3 mm of extra length. If the first threads in the housing are worn, preventing the original cap from being tightened, this longer cap offers a solution. However, this doesn’t apply to all carburetors with a 13 mm screw cap: in some models, the overflow channel is positioned lower, so the longer cap blocks it. In that case, the cap can be installed with approximately 1 mm of extra thread.