Details
For the correct set, check the number marked in the crankcase.
In some cases, when the engine has had a long service life, it may accept a slightly larger gear set.
F.i. a -2 marked crankcase could be fitted with a -1 gear set.
However, this can only be determined through an accurate measurement.
Distribution gears on a vintage BMW 2 cylinder motorcycle engine (youtube.com)
The 30° gear set can be used to replace the 20° gear set on all 1950 to 1963 models.
This requires following additional parts:
› part nr. 11410052156 - oilpump gear 30°
Only for crankshaft with 17 mm taper:
› part nr. 11310010520 - 1.5 mm shim between crankshaft gear and crankshaft bearing
It's generally recommended to exchange the early 1 or 2 pin breather plates with the later model breather plate, since the pins are known for loosening or breaking off.
› part nr. 11150031171 - timed breather plate with cast in large pins
› part nr. 11310031707 - wave ring for timed breather plate
› part nr. 23211231658 - shim 1.00 mm
Additional Information
| Main Group | 11 Engine |
|---|---|
| Part Number | 0016399 |
| Part Number | 11310016399 |
| Motorcycle Model | R51/3, R67, R67/2, R67/3, R68, R50, R50/2, R50S, R60, R60/2, R69, R69S |
