Products
- Clutch lever at gearbox R51/3 - R68
- Clutch spring plate thrust piece
- Stud bolt M6 x 25
- Tappet guide bushing (reaming required after installation)
- Oil plug M14 x 1.5 - SSt
- Oil plug M14 x 1.5 with magnet - polished SSt
- Ball bearing FAG 6207 M for crankshaft - brass cage ►see details!!
- Circlip 18mm piston wrist pin
- Cover plate for single pin breather plate
- Woodruff key 4 x 6.5 mm
- Stud bolt cylinder head
- Sleeve for cylinder head bolt R25/2 (R24, R25, R51/2) Ø18.05 (available for pre-order)
- Hex Bolt M6 x 25 - SSt
- Shim 1.5 mm, for 30° gear set (17 mm taper)
- Seal ring oil dip stick 26 x 32 x 2.5 mm
- Raised countersunk screw M6 x 22 - SSt
- Raised countersunk screw M6 x 16 - SSt
- Countersunk screw M6 x 15, 60° head - SSt
- Flat washer Ø 6.4 mm for M6 bolt - SSt (smaller outer Ø)
- Aluminum seal ring C14 x 18 x 1.5 mm
- Seal 16 x 26 x 7 for foot shift lever
- Hex bolt M6 x 25 - SW9 - SSt
- Lock ring A25 x 1.2 mm
- Shim 0.2 mm
- Shim 0.5 mm
- Shim 0.63 mm
- Shim 0.70 mm
- Shim 1.0 mm
- Bushing input shaft gearbox
- Shim washer input shaft gearbox
- Spur gear 4th speed - input shaft
- Used part: thrust piece 4th gear
- Spring 4th gear
- Shim washer rear - input shaft - 1 side chamfered
- Cylindrical roller bearing SKF NJ204 ECP, R12 - R68
- Kickstarter ratchet
- Pin for kickstarter ratchet
- Bush bearing for kickstarter shaft
- Kickstarter lever - SSt, after-market
- Hex nut M8 x 1.25 - SSt
- Used part: kickstarter gear (on request only)
- Spur gear 4th speed - output shaft
- Stop washer for output shaft
- Sliding claw 4th and 3rd gear
- Output shaft gearbox
- Woodruff key 5 x 6.5 mm
- Spur gear 3rd speed 29T
- Used part: spur gear 2nd speed 32T (price & availability on request)
- Sliding claw 1st and 2nd gear
- Used part: spur gear 1st speed 36T - R51/3 - R68 Ø=96,5
