Products
- Service: repair of tapered seat R68 flywheel
- Valve cover (thin ribs) R50/2 - R60/2 ►see details
- Saddle deck Denfeld, without frame
- Spur gear 3rd speed 24T - excellent condition
- Used part: spur gear 1st speed - 33T - excellent condition
- Light bulb 12V 21/5W, brake/rear light - BAY15d ►see details!!
- Light bulb 6V 21/5W, brake/rear light - BAY15d ►see details!!
- Brake lever with finger grooves, original Magura / BMW - NOS
- Front axle - NOS ►see details
- Letter post - max 50 gr.
- Valve seat ring exhaust 39 x 29.8 x 9 mm - "lead-free" (needs to be machined)
- Grub screw M6 x 12 for shift fork shaft
- Shim 0.76 mm
- Valve seat ring intake 42.98 x 33.33 x 7.95 mm Kolbenschmidt (needs to be machined)
- Breather plate with 2 cast-in pins - NOS ►see details
- Retaining plate for license plate 24.5 x 11 cm
- Bushing 4th gear
- Wiring harness - 5 wires - 1 mm² - price per 1 meter ►see details
- Handlebar, low model 650 mm - Fehling LN1
- Stud M8 x 1 x 28 - NOS
- Hinge in rear fender (3 lips) after-market ►see details
- Roller for conrod Ø 7.049 x 10 mm ±2μ
- Mail non-Euro zone - letter box parcel < 1000 gr. - track & trace - no insurance
- Lenshead countersunk screw M4 x 8 - SSt
- Clamping screw handlebar - polished SSt
- Hose clamp 46 mm
- Screw cap (thread Ø 13 mm x 0.8), Bing 50-200, +1 mm extra screw thread
- Breather plate with 2 cast-in pins, after-market ►see details
- Crankshaft taper adapter, 20 mm to 17 mm
- Brake spanner, rear, after-market R50 - R69S
- Float needle - rubber tip, Bing 47-030 (new model)
- Hex bolt M8 x 1.25 x 20 - Zinc plated
- Capacitor and clamp set (Noris)
- Service: final drive shimming & backlash setting R51/2 - R68
- Capacitor (Noris)
- Fork bridge upper lock nut - SSt
- cable connection to the capacitor
- Vapour blasting - 10 min.
- Vehicle identification plate BMW R60/2
- Center stand, R50/5 - R100RT up to 1981
- Half-round grooved nail
- License plate lens for taillight
- Lock plate for hex. head screw flywheel Ø 20.2 mm
- Stud bolt for cylinder head M10 / M8 x 1 x 2
- Service: crankshaft - hard chroming and precision grinding of nose bearing journal
