Products
- Coupling nut (lower) for "Everbest" Zeppelin fuel cock - 1 cylinder
- Hose connection for Everbest Zeppelin fuel cock (original)
- Gasket ring 18 x 14.5 x 1.5 for top nut on Everbest fuel cock
- Gasket ring 17 x 21 x 1.5 for bottom nut on Everbest fuel cock
- Used part: filter for Everbest Zeppelin fuel cock (price & availability on request)
- Cork gasket ring for filter in Everbest Zeppelin fuel cock
- Bushing fuel tank mounting, lower front
- Rubber mount 'silent block', for fuel tank and muffler
- Bushing fuel tank mounting, upper front
- Muffler "Fish tail" R20 - R24 (available for pre-order)
- Clamp for exhaust pipe, Ø 36 mm - polished SSt
- Cover for rubber muffler mounting
- Bushing for muffler, zinc plated
- Hex bolt M8 x 1 x 60 for muffler - zinc plated
- Flat washer Ø 8.4 mm for handlebar clamp and muffler - SSt
- Clutch lever (M8 screw)
- Driving pin for flywheel - hardened
- Clutch pressure plate R24 - R25/2
- Bracket for clutch lever
- Clutch lever R25 - R27
- Oil plug M18 x 1.5, SW 17 - SSt
- Gasket gearbox R24 - R27
- Hex nut M6 x 1.0
- Hex nut M6 x 1.0
- Stop screw for gear shift
- Output shaft R25 - R27
- Bushing 1st gear
- Spur gear 1st speed (available for pre-order)
- Double row bearing 4203, rear side countershaft R24 (available for pre-order)
- Used part: input shaft gear box (no std. stock item)
- Drive gear (driveshaft) 13T
- Thrust piece on countershaft
- Shim for input shaft 0.20 mm
- Shim for input shaft 0.30 mm
- Shim for input shaft 0.42 mm
- Shim for input shaft 0.50 mm
- Shim for input shaft 0.63 mm
- Shim for input shaft 0.70 mm
- Shim for input shaft 0.90 mm
- Shim for input shaft, set of 7 pcs, 0.18 - 0.90 mm
- Speedometer driveshaft
- Coupling flange, chrome, gearbox - driveshaft
- Lever on shift axle
- Sector gear
- Sector gear with stop - NOS
- Used part: selector lever in gearbox (price & availability on request)
- Used part: selector lever in gearbox (price & availability on request)
- Contact spring, neutral switch
- Slotted screw for shift fork
- Allen head screw for shift fork M8 x 45 - SSt ►see details
