Products
- Hex bolt M8 x 1 x 30
- Bracket for fuel tank
- Hinge pin for toolbox lid 4 x 35 mm - SSt
- Hex bolt M6 x 8 for fuel tank bracket - SSt
- Fuel cock Karcoma M20 x 1 ►see details
- Stud bolt for valve cover and crankcase M8 x 40 - SSt ►see details
- Stud bolt valve cover M6 x 22 - SSt ►see details
- Muffler "Swallow" with recess - LH - after market (available for pre-order) ►see details !!
- Muffler "Swallow" with mounting bracket - RH - after market
- Muffler "Swallow" with recess - RH - after market (available for pre-order)
- Muffler "Fish tail" - LH - after market (available for pre-order)
- Muffler "Torpedo" - LH - after market
- Clamp for exhaust pipes R5 - R51, R51/2 - R68 - polished SSt
- Exhaust pipe straight LH - precise fit (<VIN526211)
- Exhaust pipe straight RH - precise fit (<VIN 526211)
- Exhaust pipe straight LH - precise fit ►see details
- Exhaust pipe straight RH - precise fit ►see details
- Exhaust pipe straight LH, precise fit - R68 (half hub)
- Exhaust pipe straight RH, precise fit - R68 (half hub)
- Exhaust crossover pipe R5 - R51, R51/2 - R68
- Exhaust pipe LH with S bend - precise fit
- Exhaust pipe RH with S bend - precise fit
- Exhaust pipe LH with S bend - precise fit
- Exhaust pipe RH with S bend - precise fit
- Exhaust pipe LH with S bend, precise fit - R68 (full hub)
- Exhaust pipe RH with S bend, precise fit - R68 (full hub)
- Stud bolt M8 x 25 - SSt ►see details
- Tappet guide bushing (reaming required after installation)
- Copper seal ring C14 x 20 x 2 mm (crush ring)
- Spring washer B6
- Hex bolt M6 x 10 - SSt
- Cylinder stud bolt M10 x 22 - SSt
- Spring washer B8 - SSt
- Cap nut M8 SW13 - nickel-plated brass
- Push rod protection tube R68 - R69S, polished SSt
- Valve seat ring intake 42.2 x 33.5 x 10.5 mm Kolbenschmidt (needs to be machined)
- Stud bolt M8 x 25 - SSt
- Valve cover gasket
- Valve guide inlet & exhaust, L = 50 mm Ø 13.05 mm (discontinued)
- Valve guide exhaust, L = 50 mm Ø 13.06 mm (countersunk)
- Valve guide inlet & exhaust, L = 50 mm Ø 13.10 mm
- Valve guide inlet & exhaust, L = 50 mm Ø 13.20 mm
- Valve guide inlet & exhaust, L = 50 mm Ø 13.25 mm
- Valve guide inlet & exhaust, L = 50 mm Ø 13.35 mm
- Valve guide inlet & exhaust, L = 50 mm Ø 13.50 mm
- Valve guide lock ring (for 13 mm guide)
- Hex nut M6 x 1.0
- Hex bolt M6 x 22 for bearing cover front crankshaft
- Hex bolt M6 x 28 black oxide
- Hex bolt M6 x 28
