Products
- Hand brake cable R51/3 - R67/3 duplex
- Clutch cable R51/3 - R68 for solo handlebar
- Throttle cable, solo, L=105 cm
- Throttle cable, sidecar, L=106 cm
- Ignition advance cable - R51/2 solo
- Ignition advance cable - R68 solo
- Valve guide exhaust, L = 50 mm Ø 13.10 mm (for 8 mm valve stem)
- Valve guide exhaust, L = 50 mm Ø 13.20 mm (for 8 mm valve stem)
- Valve guide exhaust, L = 50 mm Ø 13.30 mm (for 8 mm valve stem)
- Cap nut M6 for upper housing cover & front fender - polished SSt
- Hex nut M6 x 1.0
- Hex nut M6 x 1.0
- Hex bolt M6 x 18 black oxide
- Cap nut M6 x 1.0
- Stud bolt M8 x 30 - SSt
- Hex nut M8 x 1.25 - zinc plated
- Oil filter plate
- Hex bolt M6 x 8 for oil screen
- Oil pan gasket, cork
- Oil pan 1.5 liter, aluminum
- Wave washer B6 - SSt
- Cam follower with 2 slots, Ø 20.00 mm +-0.01 - 1st oversize, convex, after-market
- Cam follower with 2 slots, Ø 20.04 +0.00-0.01 mm (2nd oversize), after-market
- Cam follower with 2 slots, Ø 20.00 mm convex, good quality after-market ►see details
- Cam follower with 2 slots, Ø 20.04 mm (2nd oversize), after-market (available for pre-order)
- Valve adjustment screw, without nut
- Rocker arm II - inlet left, exhaust right R68, R69, R69S
- Rocker arm I - inlet right, exhaust left R68, R69, R69S
- Nut valve adjuster
- Washer for rocker arm
- Washer 1.5 mm for rocker arm
- Bushing rocker arm (hardened)
- Support bracket rocker arm shaft
- Ball bearing 6003 SKF Explorer - for camshaft front side
- Wrist pin - Ø 20 x 56 mm ►see details
- Crankshaft complete, new production
- Set of connecting rod, tapered crankpin (Ø 36 x 53), roller cage & rollers - not available for the time being
- Set of connecting rod, cylindrical crankpin (Ø 36 x 53), roller cage & rollers
- Set of connecting rod 130 mm, 20 mm wrist pin, tapered crankpin (Ø 36 x 50 mm), roller cage & rollers - not available for the time being
- Set of connecting rod, cylindrical crank pin, roller cage & rollers (available for pre-order)
- Set of connecting rod, tapered crankpin, roller cage & rollers - not available for the time being
- Set of connecting rod, crankpin, roller cage & rollers - no replacement for alu conrod
- Set of connecting rod, tapered crankpin (Ø 32 x 50), roller cage & rollers
- Set of connecting rod, tapered crankpin (Ø 36 x 53), roller cage & rollers - 125 mm conrod
- Seal ring for oil dip stick
- Armature 60W, 20 mm taper, NOS (on request only)
- Electronic voltage regulator 12V DC (available for pre-order)
- Cover ring, M34 x 1 - 17.5 mm height, Bing 21-505
- Carburetor slide
- Carburetor main jet 125, Bing 44-051 (D~1.12 mm)
