Products
- Sleeve in cylinder head, L = 80.0 mm +0.8 mm (available for pre-order)
- Sleeve in cylinder head, L = 80.5 mm +1.3 mm (available for pre-order)
- Valve guide inlet & exhaust, L = 48 mm Ø 14.10 mm
- Valve guide exhaust, L = 50 mm Ø 14.00 mm (for 8 mm valve stem)
- Seal 7 x 16 x 7 mm for tachometer drive
- Circlip D = 6 mm
- Valve adjusting screw - after market
- Hex bolt M6 x 20
- Gasket ring for oil plug A18 x 22 mm, alu
- Collar nut - bearing cover / chain tensioner
- Plug in front bearing cover
- Gasket for oil filter lid
- Hex head bolt M10 x 1 x 20 for oil filter cover
- Oil filter cover, inner
- O-ring for oil filter (included in new oil filter !)
- Used part: air box R26 - R27 (on request only)
- Allen head hex bolt for generator cover, M6 x 60 - SSt
- Used part: Engine housing (price & availability on request)
- Cylinder head - left - R60/5, R60/6
- Cylinder head - right - R60/5, R60/6
- Used part: Cylinder head - left - R75/5, R75/6 <1976 (price & availability on request)
- Used part: Cylinder head - right - R75/5, R75/6 <1976 (price & availability on request)
- Valve cover nut M8 - chrome
- Wave washer B6 - galvanized
- O-ring for oil filter cover 44 x 4 mm - white
- O-ring for oil pump cover
- Contact breaker complete ( base plate + contact breaker)
- Fillester head screw M4 x 10
- Contact breaker (Noris) R50/5 - R100RS <09-1978
- Ignition cable, complete, with cable sleeve
- Cable sleeve (soldering)
- Cable sleeve
- Spark plug Bosch W6DC, BP6ES
- Spark plug Bosch WR5DC+ (equiv. NGK BP7ES)
- Carbon brush set (2 pcs) 3-phase generator 12 V
- Punch for push rod tube
- Throttle twist grip
- Carburetor main jet 135
- Carburetor main jet 145 Bing 44-051 (D~1.3 mm)
- Hose clamp 12 mm for fuel line B7 x 12 - SSt
- Wave washer B4 - SSt
- Float valve - Dell'orto
- Screw for starter valve - Dell'orto
- Clamping bolt - Dell'orto
- Hex nut for carburetor clamp - Dell'orto
- Valve cover gasket (cork)
- Rubber base plate for Eber tail light
- Alum. ring for Eber tail light lens
- Lens, gasket and alum. ring for Eber tail light
- Carburetor main jet 145, Bing 44-051 (D~1.3 mm)
