Products
- Gasket for drive shaft bell cover R5, R6
- Spindle "Tommy" bar - 14 mm x 20 cm for M501 - SSt
- Seal for driving dog final drive R5, R6
- Gasket and seal set for final drive R51/2 - R68 ►see details
- Bearing bolt for foot brake lever +0.2 mm
- Light bulb 12V 5W 10 x 36 mm - tail light
- Service: wet blasting - per 5 minutes
- Service: carburetor - ultrasonic cleaning
- Cap nut M8 SW14 old model - zinc plated
- Wheel bearing renewal 1 hub (excluding parts)
- Clutch thrust ring R25/3 - R27 +Mark+Swiss
- Clutch screw - Allen head 8.8 - M6 x 30 zinc plated
- Field coil 1 - 4 for 6V 45/60W generator - round core
- Oil dipstick with temperature gauge
- Reconditioned shifting fork, laser welded and ground
- Service: cylinder - grit blasting
- Chain tensioner
- Brake shoe, rear, lower, incl. glued brake lining
- Used part: gearbox input shaft R26, R27 (price & availability on request)
- Locking plate for adjusting cam - advance unit (no longer available)
- Speedometer cable R51/2 - R68
- Used part: original headlamp bucket (empty) > 1954 (price & availability on request)
- Roller for conrod Ø 7.01 x 10 mm ±1μ
- Roller for conrod Ø 7.030 x 10 mm ±2μ
- Roller for conrod Ø 7.039 x 10 mm ±1μ
- Roller for conrod Ø 7.048 x 10 mm ±2μ
- Roller for conrod Ø 7.054 x 10 mm ±2μ
- Seal ring front fork
- Used part: spur gear (counter shaft gear box) 21T (price & availability on request)
- Bearing bolt for foot brake pedal
- Bearing bolt for foot brake pedal +0.18 mm diameter
- Light bulb, bilux 6V 45/40W
- Filter for fuel cock Karcoma model (inlet filter) ►see details
- Relay for flasher 12V - X=49, L=49a
- Support bracket rocker arm shaft +0.02 for oversized shaft
- Bearing bolt for rocker arm +0.02 mm (available for pre-order)
- Spacer bolt for generator cover
- Oil felt with leaf spring for centrifugal governor
- Felt ring for kickstarter shaft
- Felt for clutch pushrod R51/3 - R68 ►see details
- Felt ring for foot shift axle
- Felt ring cover R51/2 - SSt
- Felt ring input shaft R51/2 - 33 x 46 x 6 mm
- Felt sleeve for clutch push rod R5 - R71, R51/2
- Felt ring foot shift axle R24
- Felt ring for kickstarter axle R24 (available for pre-order)
- Felt ring cover for kickstarter shaft - SSt (available for pre-order)
- Felt ring rear side crankshaft R2, R3, R4, R35, R57 - R17
- Plug screw M30 x 1.5 for chain cover R5, R51, R51/2 (available for pre-order)
- Crank pin 33 x 36 x 33 x 55,2 mm - R3, R4, R35
