Products
- Membrane for 32 mm carburetor (Bing 165-810), excellent Hydrin® quality
- Plate spring for horn (3 pcs) - SSt
- Pilot ring (Repassierring) Matra 5048 for R50S, R68 - R69S - Alu
- Crash bar for Hella tail light
- Set of connecting rod, crankpin (Ø 36 x 54.5), roller cage & rollers (available for pre-order)
- Set of connecting rod,cylindrical crankpin (Ø 36 x 53), roller cage & rollers (avaible for pre-order)
- Clutch plate - oil resistant - Siebenrock ►see details
- Carburetor: boring carburetor tube for oversized slide R25/3 - R60/2
- Carburetor: boring carburetor tube for oversized slide R25, R25/2, R51/2 - R67/3
- Service: carburetor - boring carburetor tube for oversized slide R26, R27
- O-ring for idle jet and mixture screw (Bing 65-704)
- Cable from turn signal switch to headlamp (4 wires) ►see details
- Cable from turn signal switch to headlamp + 8 cm (4 wires) ►see details
- Cap for steering lock, with pin and corrugated washer
- Service: cylinderhead - overhaul of cylinderhead R24 - R90S ►see details
- Service: cylinder - boring and honing
- Gasket ring Bing 65-710
- Insert Nr. 5/1 (Bing 25-016-5/1) - after market
- Set: Idle mix screw, cap, sleeve and jam nut
- Felt ring for gearbox output flange 36 x 47 x 5 mm
- Clutch compression ring
- Clutch pressure plate R51/2
- Clutch screw M8 x 1 x 15
- Gearbox gasket and seal set R50 - R69S ►see details
- Used part: gearbox R27 (price & availability on request)
- Brake lining 20 x 4 x 161 mm, no rivet holes
- Oil seal pinion 28 x 55 x9 +Mark+Swiss
- Service: riveting new splined bushing in wheel hub (excl. bushing) ►see details
- Splined bushing in wheel hub (for riveting) ►see details
- Contact points
- Throttle twist grip >1975
- Used part: gear set "S" gear box (price & availability on request)
- Ethanol killer - Millers EPS 250 ml (for 40 liter fuel) ►see details
- Speedometer Veigel, W=1.1, 0-160 km/h, final drive 35:8
- Speedometer Veigel, W=0.9, final drive 32:9
- Brake lever assembly complete, pre-war, RHS
- Clutch lever assembly complete, pre-war, LHS
- Set of carbon brushes
- Set of carbon brushes
- Spring for carbon brush 12V 100W
- Brush holder + -
- Allen head screw M8 x 70 (75W + 100W)
- Camshaft, race version 344° R50S, R69S (available for pre-order)
- Camshaft LHS - standard 300° Schleicher for R5, R51, R51/2 (available for pre-order)
- Camshaft RHS - standard 300° Schleicher for R5, R51, R51/2 (available for pre-order)
- Alu-bronze threaded bushing M8 / M7 x 0.75 x 12.4 mm for idle mix screw (only i.c.w. new idle mix screw!) ►see details
- Used part: shift lever & toothed segment
- Brake lever, rear wheel drive, for sidecar brakes (N.L.A.)
- Seal for ring gear – 65 x 85 x 10 mm +Mark+Swiss ►see details
- Service: ultrasonic cleaning of carburetor, incl. (dis)assembly
