Products
- Shim for gearbox stop screw
- Circlip A14 x 1
- Split pin 1.2 x 10 mm - SSt
- Washer for clutch adjustment bolt
- Handlebar grip Magura, RH - closed
- Sleeve in cylinder head
- Sleeve in cylinder head, L = 79,2 mm, Ø18,04 mm (available for pre-order)
- Bearing bushing, front crankshaft
- Bearing cover, front side crankshaft (not available for the moment)
- Bearing cover, steel, front side crankshaft - discontinued
- Bearing cover, front side crankshaft - NOS
- Bearing cover, front side crankshaft - after market ►see details
- Nut SW14 x 38 mm, for generator cover - SSt
- Nut SW14 x 38 mm, for generator cover - polished SSt
- Wave washer for camshaft
- Used part: breather plate - 2 pins (price & availability on request)
- Used part: breather plate - 1 pin
- Kickstart lever stop, complete set ►see details!!
- Fuel line filter 6 - 8 mm
- Spoke M4 x 140, straight, 2 x cross - 2 cams - chrome
- Spoke M4 x 140, straight, 2 x cross - 2 cams - SSt
- Spoke M3.5 x 140, chrome, single butted - for aluminum rim
- Rearview mirror, LH side, foldable, mounted in steering bar end
- Rearview mirror, LH side, rectangular shape (no longer available)
- Rearview mirror, LH side, oval shape, with clamp for 22 mm steering bar
- Rearview mirror, RH side, oval shape, with clamp for 22 mm steering bar
- Rearview mirror, RH side, oval shape, mounted on headlamp bracket
- Camshaft R68, R69 - sports version 328°
- Used part: armature 60W, 20 mm taper (price & availability on request)
- Knee pad (left side) for Schorsch Meier fuel tank
- Knee pad (right side) for Schorsch Meier fuel tank
- Repair metal profile for left side knee pad on Schorsch Meier fuel tank
- Repair metal profile for right side knee pad on Schorsch Meier fuel tank
- Reduction nut for fuel cock, from M20 x 1 to M16 x 1
- Throttle assembly, for R50 - R69S, Magura /5 and /6 style ►see details
- Clutch assembly, for R26 - R27, R50 - R69S, Magura /5 and /6 style
- Tapered roller bearing SKF 30203 J2
- Tapered roller bearing set for steering head (2 pcs) for US models (/5 fork)
- Cylinder R69S (R68, R69) new - (available for pre-order) ►see details
- Washer rear & front axle - polished SSt (D = 30 mm)
- Felt ring cap in wheel hub - zinc plated
- Felt ring cap in wheel hub - SSt polished
- Cover for wheel bearing R26, R27 - SSt polished
- Cylinder R68 new (available for pre-order) ►see details
- Filler cap, aluminum, after-market (gasket included) ►see details
- Spring for center stand - polished SSt
- Plug for swing arm R26 - R27
- Shim set, from 0.20 mm to 1.00 mm (7 pcs) ►see details
- Shim washer for gearbox output shaft
- Crankcase vent tube, bevel cut, SSt polished
