Products
- Drive shaft gearbox - new
- Used part: Drive shaft gearbox (price & availability on request)
- Used part: Housing cover final drive R25 - R25/2 (price & availability on request)
- Wrist pin - Ø 18 mm x 57 mm
- Fuel line filter - glass for 8 mm fuel hose
- Bearing bolt R25/2
- Washer Ø 10.5, for shock absorber screw
- Hex nut M8 x 1.25
- Spring for front wheel stand (currently unavailable)
- Tank badge, enamel/nickel, domed, R24 - R25/2 original BMW
- Used part: housing cover final drive R25/3 (price & availability on request)
- Used part: seal cover final drive (price & availability on request)
- Stud M8 x 1 / 1.25 x 20 for final drive cover - SSt
- Spacer sleeve with felt ring, crown wheel
- Retaining screw for crown wheel
- Side stand, complete, for M14 x 1.5 pivot hole ≥ 1957
- Bushing 18.4 x 12.9 x 9 mm, for center stand, hardened (oversized ID & OD) ►see details
- Service: final drive - replacing white rubber disk on drive shaft
- Bearing bolt for foot brake lever
- Hex nut M10 x 1, flat, for brake lever
- Washer for brake rod - SSt
- Spark plug cap with Noris logo - Bakelite - 0 KΩ (available for pre-order)
- Spark plug cap, Bosch - black - 0 KΩ
- Spark plug cap, Bosch - brown - 0 KΩ
- Cork gasket, gearbox & engine
- Suspension bolt for center stand spring - SSt
- Stop for gear shift
- Used part: cover for foot shift (price & availability on request)
- Combi tool for R26 & R27 cardan shaft
- Cap nut for swing arm bolt - zinc plated
- Cap nut for swing arm bolt - polished SSt
- Bolt for front swing arm - polished SSt
- Gasket ring for oversized M8 screw cap
- Bowden cable for mechanical dimmer switch R12, R17, R25, R51, R51/2
- Rubber grommet in headlamp
- Crankpin 36 x 36 x 53 mm - cylindrical - FAG Dürkopp
- Crankpin 32 x 50 mm - 1 side tapered (available for pre-order)
- Crankpin 36 x 53 mm - 1 side tapered (available for pre-order)
- Crankpin 36 x 50 mm - 1 side tapered
- Crankpin 32 x 53 mm - cylindrical (available for pre-order)
- Crankpin 36 x 54.5 mm - cylindrical - for reinforced crankshaft
- Bearing cage for conrod - for 36 mm crankpin and 46 mm conrod - 16 x 5 mm rollers ►see details
- Lens for Eber tail light (w/o brake light)
- Lens for Eber tail light (brake light) - glass, not plastic
- Hex screw M5 x 13 mm for float chamber cover, Bing 40-528
- Hex screw for float chamber cover, Bing 40-528
- Reinforcement bow on rear fender, R51/2 - R68
- Supporting plate for brake light switch
- Seat cushion "Schorsch Meier" - real leather (available for pre-order)
- Attachment parts for seat cushion "Georg Meier" R68 (del. time on request)
