Products
- Tapered roller bearing set for steering head (2 pcs) for US models (/5 fork)
- Cylinder R69S (R68, R69) new - (available for pre-order) ►see details
- Washer rear & front axle - polished SSt (D = 30 mm)
- Felt ring cap in wheel hub - zinc plated
- Felt ring cap in wheel hub - SSt polished
- Cover for wheel bearing R26, R27 - SSt polished
- Cylinder R68 new (available for pre-order) ►see details
- Filler cap, aluminum, after-market (gasket included) ►see details
- Spring for center stand - polished SSt
- Plug for swing arm R26 - R27
- Shim set, from 0.20 mm to 1.00 mm (7 pcs) ►see details
- Shim washer for gearbox output shaft
- Crankcase vent tube, bevel cut, SSt polished
- Wave washer B6
- Clamping bush
- Tachometer cover
- Crankshaft rear oilseal - 52x72x10 mm
- Oil pump gear 20°
- Tapered roller bearing 30203 + 0.06 mm (available for pre-order)
- Tapered roller bearing 30203 + 0.07 mm (available for pre-order)
- Tapered roller bearing 30203 + 0.08 mm (available for pre-order)
- Tapered roller bearing 30203 + 0.09 mm (available for pre-order)
- Tapered roller bearing 30203 + 0.10 mm (available for pre-order)
- Tapered roller bearing 30203 + 0.12 mm (available for pre-order)
- Tapered roller bearing 30203 + 0.15 mm (available for pre-order)
- Spacer ring - large - for clutch (i.c.w. 9 mm friction plate)
- Hex bolt M8 x 1.25 x 60 - SSt
- Hex bolt M8 x 1.25 x 60 for muffler - polished SSt
- Hex nut M8 x 1 SW13 - zinc plated
- Spring cover, upper, polished alum., after-market
- Multitool Matra 499/1/2 ►see details
- Knurled nut for pressing rear crankshaft bearing
- Hex bolt M8 x 1 x 110 for fuel tank - SSt
- Hex bolt M8 x 1 x 30 for tank & saddle mounting - SSt
- Flat washer Ø 8.4 mm - SSt
- Complete set of gaskets & seals for R51/3 - R67/3 engine ►see details
- Complete set of gaskets & seals for R68, R69, R69S engine ►see details
- Complete set of gaskets & seals for R51/2 engine (availabe for pre-order)
- Used part: clutch lever - M8 screw (price & availability on request)
- Raised countersunk screw M6 x 22 - SSt polished
- Raised countersunk screw M6 x 16 - SSt polished
- Hex bolt M6 x 25 - SW9 - polished SSt
- Oil plug M14 x 1.5 - polished SSt
- Oil plug M14 x 1.5 with magnet - zinc plated
- Hex bolt M6 x 10 - SSt
- Lock screw for toolbox lid (>1952) - SSt polished
- Washer set for lock screw for toolbox lid (>1952)
- Countersunk screw M4 x 20 for toolbox lock
- Air filter insert LX193 (for Knecht LP492 air filter)
- Relay for blinker 6V Wehrle, 31 = (-), 49 = (+), 49A = switch
