Products
- Suspension spring Ø 7.6 mm - sidecar
- Suspension spring Ø 8.5 mm (reinforced) - sidecar
- Adjusting tool for neutral switch, R50 - R75/5 ►see details
- Rocker arm for inlet right & exhaust left, R5, R51, R66
- Middle bushing in rocker arm - 9.2mm R5, R51, R66
- Washer 2.0 mm for rocker arm R5, R51, R66, R75
- Plug screw M30 x 1.5 for chain cover R5, R51, R51/2 (available for pre-order)
- Gear change return spring R51 - R71
- Compression spring for ratchet (delivery time on request)
- Valve keeper, D = 8 mm collet (delivery time on request)
- Inlet / exhaust valve Ø 8 x 36 mm R5, R51, R66, R75
- Used part - brake spanner, front, R25/3 - R27
- Used part: brake holder R50 - R69S with brake shoes and levers (price & availability on request)
- Exhaust pipe clamp R27, front, with welded nut - polished SSt
- Hand brake cable R51/2 - R68 Simplex - sidecar handlebar
- Horn 12V, black with chrome cover Ø 100 mm
- Fuse 8 Amp.
- Service: cylinderhead - repair of cylinder head fins ►see details
- Used part: cardan shaft 1:6 with universal joint (price & availability on request)
- Spoke fitting gauge for 3 x 18" rims R50 - R69S (out of stock)
- Capacitor with screw connector - 0.22μF (made in Germany)
- Oil pump cover - polished SSt
- C Clip for contact points
- Air filter w/o insert - after market (discontinued - does not fit well)
- Rivet 5 x 16 mm for wheel hub and brake drum R25/3 - R69S
- Kickstarter tool ►see details
- Shock absorber valve - oversize Ø ~13,96 mm.
- Hex bolt M6 x 8 for oil sieve - zinc plated
- Brake holder R50 - R69S NOS (price & availability on request)
- Clamp for saddle frame
- Wet air filter R27 up to VIN 379582 (discontinued)
- Tapered roller bearing FAG 30203-A
- Ball bearing FAG 6003 - for camshaft front side
- Bearing FAG 6204 C3 ►see details
- Cylinder foot gasket - R52, R62, R57, R63, R11, R16, R12
- Tyre Metzeler Block-C 3.25 x 19" ►see details
- Serrated washer J4.3
- Wave washer B5
- Fillesterhead screw M3.5 x 10 for tail light chrome ring (zinc plated)
- Brake lining 35 x 4 x 175 mm - Beral "Grün" (for 3 mm rivets) NON-ASBESTOS
- Brake lining 35 x 4 x 175 mm, no rivet holes - Beral "Grün" NON-ASBESTOS
- Oil pump cover - SSt
- Ball bearing SKF 6206 front + rear crankshaft and ring gear ►see details
- Brake cable adjusting screw R12, R17, R75
- Nipple for brake cable R12, R17 - SSt
- Spring cover, upper, 66 mm Ø - polished aluminum, original
- Bolt M8 x 1 x 12
- Tapered roller bearing 30204, wheel hub, +0.05 mm (available for pre-order)
- Tapered roller bearing 30204, wheel hub, +0.30 mm (available for pre-order)
- Tapered roller bearing 30204, wheel hub, +0.03 mm (available for pre-order)
