Products
- Thrust spring for carbon brush - R51/2
- Cable adjusting screw & nut on carburetor, 25 mm (Bing 50-050)
- Screw for steering damper resistance plate - solo R51 - R71, R51/2
- Tappet guide bushing L = 47.8 mm (reaming required after installation)
- Brace for front fender 18" R26 - R69S - chrome (32.5 cm) ►see details !!
- Used part: oil catchment plate
- Round exhaust nut - polished SSt - M45 x 2 - extra length +3 mm ►see details!!
- Bearing cover, swing arm - Steib LS 200 / S 350 / S 500, polished SSt
- Sleeve for cylinder head bolt R25/2 (R24, R25, R51/2) Ø18.10 (available for pre-order)
- Sleeve for cylinder head bolt R25/2 (R24, R25, R51/2) Ø19.00 (available for pre-order)
- Sleeve for cylinder head bolt R25/2 (R24, R25, R51/2) Ø19.05 (available for pre-order)
- Sleeve for cylinder head bolt R25/2 (R24, R25, R51/2) Ø19.10 (available for pre-order)
- Sleeve for cylinder head bolt R25/2 (R24, R25, R51/2) Ø19.10 (available for pre-order)
- Thrust sleeve 10 mm, left side - SSt
- Speedometer cable R12 - R17, R5 - R71, R51/2, L = 105.5 cm - after market
- Used part: gearbox housing R50 - R69S
- Set screw M6 x 1 x 6 - Allen head
- Service: reporting - phase 1 reporting gearbox (disassembly-cleaning-techn. assesment)
- M355 Spindle
- Stud bolt M6 x 25 - zinc plated steel
- Fuel cock R1/4” R2, R4, R3, R35
- Service: gearbox - disassembly of gearbox inner parts R24 - R27
- Service: gearbox - disassembly of gearbox R24 - R27
- Service: gearbox - disassembly of gearbox inner parts R51/2 - R68
- Service: gearbox - disassembly of gearbox R51/2 - R68
- Service: gearbox - disassembly of gearbox inner parts R50 - R69S
- Service: gearbox - chemical cleaning of gearbox R24 - R27
- Service: gearbox - chemical cleaning of gearbox R51/2 - R68
- Service: gearbox - disassembly of gearbox R50 - R69S
- Service: gearbox - chemical cleaning of gearbox R50 - R69S
- Service: gearbox - assesment, reporting & handling R24 - R27
- Service: gearbox - assesment, reporting & handling R51/2 - R68
- Service: gearbox - assesment, reporting & handling R50 - R69S
- Speedi Sleeve 38,68 mm for output flange R51/3 - R68 ►see details
- Telescopic leg eye - left - bare metal
- Telescopic leg eye - right - bare metal
- Service: gearbox - hard chrome plating & grinding of kickstarter shaft
- Vehicle Identification plate R26 - flat
- Shim 3 mm front swing arm
- Ring for side stand
- Hex bolt M8 x 1 x 15 - zinc plated
- Angular contact ball bearing FAG 3203-BD-XL-2HRS (2 sides closed) wheel hub R25 - R25/3
- Rear part of rear fender R51/3 - R68, new, unpainted, w/o attachment parts (del. time on request)
- Z-bracket for saddle frame
- Rearview mirror, RH side, foldable, mounted in steering bar end
- Lens head countersunk screw M5 x 32, R5 - R71, R51/2 - SSt
- Seal ring for Frankfurter fuel cock filter (~20 x 24.5 x 2.5 mm) - rubber
- Service: wheels - riveting wheel hub in brake drum (full hub) -> this service is temporarily unavailable
- Hose clamp 11 - 13 mm for fuel line B7 x 12 - Zinc plated
- Valve guide inlet & exhaust, L = 43 mm Ø 13.03 mm ►see details
