Products
- Stud M8 x 60 for clamp yoke - SSt ►see details
- Hex bolt M12 x 1.5 x 35 - SSt, for foot pegs
- Hex bolt M12 x 1.5 x 35 - polished SSt, for foot pegs
- Oil pan aluminum 3 ltr., incl. gaskets, bolts, oilplug, sieve distance piece
- Exhaust clamp, front, Ø36 mm - polished SSt
- Hex bolt M8 x 22 - SSt
- Hex bolt M8 x 40 - SSt
- Hex bolt M8 x 1.25 x 70 - SSt ►see details
- Rubber cover brake light switch (for old model switch, not for new Noris switch)
- Brake adjusting bolt - brass
- Lever screw 12 mm head - polished SSt
- Hex bolt M6 x 16 - polished SSt
- Hex bolt M8 x 1 x 45 for seat spring / muffler - polished SSt
- Hex bolt M6 x 30 for front brake lever - polished SSt
- Clamping bolt in fork bridge - SSt
- Chrome ring, glass, seal and white ring for speedometer - after market ►see details
- Toolbox lock
- Set of M3 screw, nut and washers for alu. lippings
- Field coil 1 - 6V 75W (available for pre-order)
- Field coil 2 - 6V 75W (available for pre-order)
- Field coil 3 - 6V 75W (available for pre-order)
- Field coil 4 - 6V 75W (available for pre-order)
- Field coil 1 - 12V 100W (available for pre-order)
- Field coil 2 - 12V 100W (available for pre-order)
- Field coil 3 - 12V 100W (available for pre-order)
- Field coil 4 - 12V 100W (available for pre-order)
- Fillister head screw for original field resistance
- Spring for field resistance (not available anymore)
- Armature 6V 75W - 20 mm taper - rewound, in exchange
- Armature 12V 100W DC (on request only)
- Allen head hex bolt for generator, M6 x 70 - SSt
- Allen head hex bolt for 75 & 100W generator, M6 x 75 - SSt
- Armature 60W for 17 mm taper, rewound, in exchange
- Float housing cover, complete - Bing 32-310-112 ►see details
- Complete set of gaskets & seals for R24 - R25 engine ►see details
- Voltage regulator 12V - mechanical
- Holder for regulator and diode plate 12V three-phase (N.L.A.)
- Rear shock absorber - HAGON ►see details
- Shock absorber, front suspension +Mark+Swiss (ATOS) ►see details
- Rear shock absorber +Mark+Swiss (ATOS) ►see details
- Footpeg rubber
- Muffler "Swallow" R25/2 - original look, optimimal performance
- Clamp 45 mm for rubber boot, upper - SSt
- Hose clamp 20 - 32 mm for rubber boot, lower - SSt
- Shifting fork (NOS)
- Cylinder head LH side
- Muffler "Torpedo" - R25/3 - optimized for performance
- Exhaust header clamp R25/3 - polished SSt
- Cover for wheel bearing - polished SSt
- Tank Cure - rust remover 200 ml
